Header Snap Rings
Header Wave Springs
Top Navigation 1Home  |  About Us  |  What's New  |  Part Lookup  |  Specials  |  Get Samples  |  Information Center  |  Quality  |  Ask the Expert  |  Careers  |  Contact UsTop Navigation 2
Top Navigation Cap 1 Top Navigation Spacer Top Navigation Cap 2
Design a Custom Retaining Ring

To design a custom retaining ring or snap ring, enter the required retaining ring or snap ring design paramaters below.

Design Custom Ring -- Specifications (step 1 of 4):
Calculate
Thrust Capacity Ring Shear
Thrust Capacity Groove Yield
Retained Component Geometry
Maximum RPM
Minimum Edge Margin
Installation Stress
Design Parameters
Units: Standard (switch to Metric)
Retaining Ring Thickness (in):
Retaining Ring Radial Wall (in):
Number of Turns:
Retaining Ring Safety Factor:
Retaining Ring Material:
Retaining Ring Type:
Actual Load (lbs):
Application Diameter:
Groove Diameter (in):
Groove Safety Factor:
Groove Material:
Other Yield Strength:

 
Right Navigation Divider 1

Quick Search



Right Navigation Divider 2

Wave Spring and
Retaining Ring
Part Search

Enter a partial or full wave spring or retaining ring part number below:

Right Navigation Divider 3

Site Search

Right Navigation Divider 4 Smalley Wave Spring, Retaining Ring and Snap Ring Company Europe Smalley Wave Spring, Retaining Ring and Snap Ring Company Nordic Smalley Wave Spring, Retaining Ring and Snap Ring Company Latin Spirolox by Smalley Wave Spring, Retaining Ring and Snap Ring Company
Quick Question
Name

E-mail

Phone Number

Question

Verification Code
Verification
Change Image
Bottom Navigation Cap 1 Bottom Navigation Spacer Bottom Navigation Cap 3
Bottom Footer 1
© 2012 Smalley Steel Ring Company. All rights reserved.Terms of Use | Privacy Policy | Terms & Conditions | Export Compliance | Environment | Email Us | Directions | Site Map | Mobile Site
Bottom Footer 2
Bottom Interface 1   Bottom Interface 2