FS-014

External, Metric DIN, Constant Section Retaining Ring, for 14.00mm Shaft Diameter, 1.10mm Groove Width

Customize Part
Illustration of an External Constant Section Ring with C-Type Ends

b

t

d

w

Ds

Dg

Di

Specifications
Part Number
FS-014
Ring Type
  • External (Shaft)
Ds: Shaft Diameter (mm)
14.00
Dg: Groove Diameter (mm)
13.40+.00/-.11
w: Groove Width (mm)
1.10+.14/-.00
Di: Free Inside Diameter (mm)
13.31+.00/-.33
t: Ring Thickness (mm)
0.94±.05
b: Ring Radial Wall (mm)
1.40±.10
# of Turns
1
Crimp
No
Ring Shear (N)
11396 (safety factor of 3)
Groove Yield (N)
2077 (groove material yield strength of 45,000 psi and safety factor of 2)
Rotational Capacity
21602 RPM
Please contact a Smalley Engineer to discuss rotational-dependent applications.
Standard Materials
Carbon Steel SAE 1060-1075, 302 Stainless Steel

Product Overview

The FS Series metric Constant Section retaining rings are Smalley's equivalent to the European or "Hard" metric retaining  ring series. These snap rings will fit into the grooves established by DIN specifications.

Request Samples Request Quote Quality Certificates Buy Now (opens in a new tab)