Smalley
Reatining Ring and Wave Spring Part Number Search Help
Tips for searching:
Smalley wave spring and snap ring part numbers have no spaces, enter a dash between
the series and the number
Do not enter a material suffix, the Smalley part database
is not material specific
Specifying Part Number: Retaining Rings
Retaining ring part numbers consist of three parts: the ring
series and application diameter, the material and the finish.
Please use the following guide to correctly identify a part:
Series & Application Diameter:
The first portion of a Smalley retaining ring part number represents what
series of retaining ring is specified. This indicates whether the
retaining ring is a light duty, medium duty, medium heavy, heavy,
metric or snap ring. This portion of the part number also
indicates whether the retaining ring is an internal/housing ring or
external/shaft ring and the application size.
Example:
WH-100
1.000" Medium Duty Housing Ring
WSM-150
1.500" Heavy Duty Shaft Ring
Specifying Part Number: Wave Springs
Wave spring part numbers consist of three parts: the wave spring
series and application diameter, the material and the finish.
Please use the following guide to correctly identify a part:
Series & Application Diameter:
The first portion of a Wave Spring Smalley part number represents what
type of spring is specified. The following prefixes should
be used to specify wave spring type:
Series
Prefix
Standard Single-Turn Spring
SSR
Bearing Preload Spring
SSB
Narrow Section Single-Turn Spring
SSR-N
Crest-to-Crest Spring
C
Crest-to-Crest Spring with Shim End
CS
Shim Spring
SSRS
Wavo Spring
RW
Example:
C150-M5
1.500" Crest-to-Crest Wave Spring
CS125-L10
1.250" Crest-to-Crest Wave Spring with Shim Ends
RW-0237
2.375" Wavo Spring
Finish: To specify a
finish on retaining rings or wave springs add the appropriate
suffix behind the part number. On standard materials, no suffix
is necessary. An oil dip is provided on carbon steel to prevent
corrosion. Stainless steel parts are vapor degreased and go
through an ultrasonic cleaning process.
Example:
WH-100-PA
1.000" Medium Duty Housing Retaining Ring with passivation
Material: To specify the
material add the appropriate suffix below to the end of the
part number.
Example:
VH-50
0.500" Light Duty Housing Retaining Ring in Carbon
Steel
VS-100-S02
1.000" Light Duty Shaft Retining Ring in 302
Stainless Steel
C050-M5-INX
0.500" Crest-to-Crest Wave Spring in Inconel
X-750
302 & 316 Stainless Steel are available for special designs
on Smalley wave springs. 17-7 PH C/CH900 Stainless Steel is
available for special designs on Smalley retaining rings.
Quick Search
Wave Spring and Retaining Ring
Part Search
Enter a partial or full wave spring or retaining ring part number below:
